I am in love with my new Spinning Jewelry Display Rack! I use it for displaying my Paparazzi Jewelry that I sell but I’m sure you could use it for lots of other things as well, so I thought I’d post a quick tutorial.
This post may contain affiliate links for products that I personally use; all opinions are my own.
The handmade spinning rack cost about $17 to make, plus a few scraps we had at home.
This one on Amazon is smaller in case you’d rather buy one.
How to Make a Jewelry Spinner
You’ll also need a square piece of scrap wood for the bottom and lid, and 1x2s or whatever for the skeleton inside.
Cut the pegboard into 4 pieces that are equal and fit the four sides of the square board. Then use wood glue and screws to attach the boards to the bottom board. Wood bar clamps help hold it together. Trevor attached 2 sides then put up the skeleton of a 1×2 in the corners to add more stability, then attached the other 2 sides to the base and corner boards.
Trevor speeds up his drilling and screw driving using this awesome drill/driver flipping bit – so fast!
Then attach the lazy susan to the bottom – just screw into the 4 corner holes:
Paint it if you’d like. Here’s the view looking down into it:
And the outside. The lid just sits on top of those corner boards. And there’s a knob on the top so it lifts off. I love that feature and store lots of headbands inside when transporting my display:
And here it is loaded with pegboard hooks and ready with the fun $1 Starlet Shimmer things – now the little girls can spin and browse to their hearts content – wahoo!!
If you need a Spinning Jewelry Display Rack for any reason, give this a try!
Jewelry Display Ideas
If you love DIY Projects, you also might like to learn about Customizing a Spinner.