Hello my dear crafters! I’m Caitlin at Songbird takes flight. I am a substitute teacher, barista, and crafter who loves sewing and all kinds of other crafts. My blog is a mix of crafts and my crazy rantings about anything and everything. If you like this tutorial, please check my blog out. Now, however, for what you’ve all been waiting for:
1 yard each of four different coordinating fabric
2 yards of a coordinating fabric for the back side of the placemats and runner
Interfacing, iron on or sewn in
6 packs of ½ inch double fold bias tape
adjustable binding foot like THIS
Or, alternatively, patience in attaching binding without one
Pick out a pile of gorgeous fabrics from your local store. I suggest four for the top of your place mats and then one for the backing. I purchased one yard of each of the top fabrics and two yards of my backing fabric.
The bottom fabric is my backing and the top four I used on the top</ span>
Pre-wash, dry, and iron your fabrics. Then trim your selvedge edges.
Let’s talk math. My place mats are 14 by 18 inches. This pattern uses quarter inch seam allowances so the strips are cut to 3 ½ x 14 inches to allow for seam allowances. I decided to make six place mats and a table runner that is five feet long. You need fourteen 14 x 3 ½ inch strips of each of the four “top” fabrics to make what is shown.
Note Here: In a perfect world, everyone who have a cutting mat, rotary cutter, and quilting ruler. Mine is currently in the mail so I completed this using a yardstick, scissors, and a carpenters square.
Press each piece and place the pieces in the order they will be sewn together. I then grouped them so I had six pieces for each place mat and twenty pieces for my runner.
My fabrics nice and cut, ironed, and organized.
Start pinning. I prefer to pin all of my seams together for each place mat and then sew everything at once, rather than pinning as I go. Pin wrong side to wrong side, going in a row as shown below.
Place your second piece on top of your first, wrongsides out. Pin along top.
Open up the fabric
Pin piece three to piece two and repeat the process until all pieces are pinned.
Stitch each seam, removing pins as you go and then press all the seams and if you, like me, were less than perfect with your measuring and cutting, trim the edges so they are all even.
My seams, some pressed and others waiting for my nice hot iron</ span>
Cut your interfacing and fuse to place mat according to package directions
The wrong side of my place mat with interfacing fused on. Word to the wise: Make sure the side with all the little dots is facing your fabric. I almost fused this to my iron…
Cut backing fabric to match and then pin all layers together. At this point, use safety pins in the middles of your rectangles since you are going to be quilting soon.
See all my layers just waiting to be sewed together? So close to finished!
Attach your binding. There are many tutorials that explain this much better than I can. THIS one explains how to use a binding foot and THIS tells you how to attach double fold binding tape using a standard presser foot. It takes patience.
“Quilt” your place mats. I chose to do a simple outline of each block.
Ain’t it purty?
If you like the detailed edge finish of my final place mat, I achieved this look by using one of the embroidery functions on my sewing machine. I have a Singer Confidence.
I hope you enjoyed this tutorial and will visit me at my blog Songbird Takes Flight. If you like the “snowballs” in the centerpiece, there is a tutorial to make them and faux mercury glass ornaments in my blog.
P.S. Special Thanks to Mandy for the opportunity to share this tutorial with all of you. 🙂
Thanks for checking out this post from www.SugarBeeCrafts.com – – click on over to read it in its entirety – you’ll love it!